F. Jannone AG

Official distributor for Leister Switzerland

Roof

HOT JET, S, the Small hand tool

The HOT-JET S ist the smallest hand tool worldwide. Low-noise and handy.

HOT JET S, das kleine Handgerät

  • Smallest hand tool worldwide
  • Temperature electronically and steplessly adjustable
  • Air flow electronically and steplessly adjustable
  • Electronic protection of the heating element
  • Low-noise
  • Integrated flexible tool stand

TRIAC AT, le robuste appareil de soufflerie à air chaud

The TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic.

TRIAC AT, das robuste Heissluftgerät

  • Suitable for the work site
  • Closed loop controlled temperature
  • Open loop controlled air volume
  • Intelligent «e-Drive» operating unit
  • Ergonomic handling
  • Modern design

TRIAC S, the economical hand tool

The TRIAC S is used worldwide and he is very reliable, compact and robust.

TRIAC S, das kostengünstige Handgerät

  • Cooled protective tube
  • Electronic protection of the heating element
  • Automatic switchoff at minimum carbon brush length
  • Multiple replacement of carbon brush possible
  • Suitable for continuous operation

TRIAC ST, the ergonomic hand tool

The TRIAC ST is the successor model of the TRIAC S. it is primarily used for welding and processing plastic.

TRIAC ST, das ergonomische Handgerät

  • Suitable for the work side
  • Ergonomic handling
  • Low weight (less than 1 Kg)
  • The nozzles are compatible with the Triac S and the Triac AT
  • Quick clean air filters
  • Automatic carbon stop (collector protection) and heating element protection

BITUMAT B2, the machine for welding bitumen

Fast and flameless welding of bitumen with the Bitumat B2.

BITUMAT B2, der Automat zum Bitumenschweissen

  • Flame-free welding of modified bitumen
  • Consistent welding results
  • Easy control of hot air volume
  • High working speed
  • Requires only one user to efficiently weld seams (for open flame two are required, one for heating and one for pressing on)

 

COMET sub-roof

The COMET is smoke-free and very quiet. Thanks to the built-in guide system, the width of weld zone is homogeneous – resulting in no non-welded edges. It is especially suitable for pre-fabrication of sub-roof membranes.

COMET für Unterdachbahnen

  • Smoke-free, low-noise welding using hot-wedge technology
  • Digital temperature and speed display
  • No non-welded edge zones
  • Ideal for indoor applications
  • (without fitting welding carriage)

 

TRIAC DRIVE AT with guide aid

The TRIAC DRIVE AT is an easy-to-use, semi-automatic lap welding machine for universal use in all conditions.

TRIAC DRIVE AT mit Führungshilfe

  • Lap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
  • Faster and more economical than hand welding
  • Small and compact
  • Speed infinitely variable for higher quality of the welding seam
  • Can be used in the most confined spaces
  • Various welding seam widths

TRIAC DRIVE AT, the lap welding machine

The TRIAC DRIVE AT is an easy-to-use, semi-automatic lap welding machine for universal use in all conditions.

TRIAC DRIVE AT, zum Überlappschweissen

  • Lap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
  • Faster and more economical than hand welding
  • Small and compact
  • Speed infinitely variable for higher quality of the welding seam
  • Can be used in the most confined spaces
  • Various welding seam widths

UNIFOOR AT/ST

The new UNIROOF AT/ST roof welder is your flexible partner for welding thermoplastic roofing membranes on flat or pitched roofs.

UNIROOF AT/ST

  • No retooling, thanks to movable transportation axe
  • Maintenance-free direct drive and closed-loop technology
  • Ergonomic handling, flexible relocation and optimal machine guiding
  • Welding roof structure profiles

VARIMAT V2

Using the new VARIMAT V2 plastic insulation sheets can be welded more rapidly and so at lower cost.

VARIMAT V2

  • At more than 8 m/min the highest welding speed (depending on material)
  • Guide bar prevents back pain
  • Maintenance free blower, no carbon brushes to replace
  • User friendly display with “e-Drive” (press and turn button) to recall pre-set and saved welding settings
  • Close loop system for continuous welding speed
  • The patented pendulum / pressure roller smoothes out any unevenness

 

EXAMO USB

The EXAMO USB is ideal for measuring directly on the building site. Data recording on a memory card. Jaw distance 300 / 600 mm.

EXAMO USB, das Prüfgerät

  • Mobile construction, suitable for building sites
  • Handy, robust and light
  • Digital display of elongation, maximum force, tear-out force, test speed and position
  • Data recording on a memory card
  • Optionally for geotextiles
  • UNI

Pressure roller

Ergonomic design saves force and has a lot of grip: The pressures rollers from Leister.

Handandrückrolle

  • High quality (ball bearing, silicone roller, wooden handle)
  • Durability (silicone roller distance in the test over 65 000 m)
  • Improved ergonomics, suitable for both left and right handed operators
  • Newly developed bow shape for higher pressure and work without strain
  • The optimum roller width for any application (40 and 28 mm)

DeutschFrançaisItaliano